When installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets.
The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the gearbox tunnel.
- 100% direct fit with no modifications required to the gearbox tunnel
- Available for either center console or side mount LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
- Outside mount includes 4x replacement M6x20mm
- Inside mount includes 4x replacement M6x20mm as well as hardware to suit LOW handbrake mount seen HERE
Inside mount = mounts inside the center console itself, no modifications required to the trim when used on both the left and right-hand side.
Outside mount = mounts outside the center console itself, no modifications required to the trim when used on both the left and right-hand side.
NOTE Outside mount when used on the drivers side may have contact with the OEM seat when the seating position is close to the steering wheel, the OEM seat can still be used but can cause damage with prolonged use.
GKTECH
Z34 370Z car specific handbrake
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.When installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets.
The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the gearbox tunnel.
- 100% direct fit with no modifications required to the gearbox tunnel
- Available for either center console or side mount LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
- Outside mount includes 4x replacement M6x20mm
- Inside mount includes 4x replacement M6x20mm as well as hardware to suit LOW handbrake mount seen HERE
Inside mount = mounts inside the center console itself, no modifications required to the trim when used on both the left and right-hand side.
Outside mount = mounts outside the center console itself, no modifications required to the trim when used on both the left and right-hand side.
NOTE Outside mount when used on the drivers side may have contact with the OEM seat when the seating position is close to the steering wheel, the OEM seat can still be used but can cause damage with prolonged use.
Choose options
FAQs
Will this work with "insert brand of hydraulic hyandbrake here"?No, this bracket is designed specifically for our hydraulic handbrake assembly.
Are any permanent modifications required to fit this bracket?
The side mount brackets can be installed with zero modifications.
VEHICLE COMPATIBILITY
Nissan
Z34 370ZGoes with your build
Picked just for you 😘
