Over 10,000 sold! This is probably the single best cooling mod you can do to your car!
The GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR/KA engine.
- Direct replacement of the standard fan
- Pulls 60% more air than the factory SR fan
We do sell an RB/ VG specific fan which can be seen here: https://au.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow
NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14/S15's with Nismo engine mounts are fine and our fan will fit.
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
GKTECH
SR20/KA24 High Performance Engine fan - 60% more air flow
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.Over 10,000 sold! This is probably the single best cooling mod you can do to your car!
The GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR/KA engine.
- Direct replacement of the standard fan
- Pulls 60% more air than the factory SR fan
We do sell an RB/ VG specific fan which can be seen here: https://au.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow
NOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14/S15's with Nismo engine mounts are fine and our fan will fit.
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
Choose options
FAQs
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don’t know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it’s not listed on our website, then we don’t sell it. Sorry.
However, we do sell an RB/VG engine specific fan here - https://au.gktech.com/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow
What’s the advantage of using the GKTech engine fan?
We tested the clutch fan on a test vehicle in a controlled environment (on a dyno) with back to back tests and from 90 degrees celsius, it took less than half the time to go from 90 degrees to idle operating temperature. We found the fan pulls 60% more air than the factory SR fan and 40% more air than the factory RB fan.
What modifications are required, is this hard to fit?
No modifications are required, simply just remove and refit.
Is there anything else needed for installation?
You will need to supply your own clutch pack.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge it is straightforward. Installation should take around 45 minutes. However, being a vital engine component we recommend only a trained professional to install this product.
How do clutch fans compare to thermo fans?
If you’ve ever been to the track with thermo fans you know that unless setup with a shroud and correctly, they’re useless. Clutch fans with the standard shroud are the way to go.
What’s the weight on the clutch compared to the standard item?
The standard clutch fan is 415mm’s in diameter and weighs in at 640grams. Our new design is 430mm’s in diameter and coincidentally also weighs 640grams.
What is the clutch fan made of?
The clutch fan has a metal center (like the factory unit) and is made of ABS plastic (like the factory unit).
Will I lose any engine power with the fan pulling more air?
No, with our dyno tests on the same car within 30 minutes of each test with multiple runs made we actually GAINED around 1% in power with the new clutch fan installed. The cause of this? There was less heat soak and everything was running cooler.
Which way do I install it?
The fins on the fan are to taper back towards the engine.
VEHICLE COMPATIBILITY
Nissan
S13 SR20 180SXS13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
USER GUIDE(S)
Install Videos
Direct replacement and it pulled more air for ac
Fits like Oem but with better airflow! :)
No clearance issues 👍
Big improvement compare to stock fan ! I see a more airflow because of10 blades and its great product, tried and tested on hot summer days.
My KAT has this, and now my daily! I wanted to improve air flow for my AC condenser in this summer heat. In theory, moving more air through the radiator and ac condenser should help pull heat out of the system. I like my ice cold AC in my bone stock 240!
Works perfect on my sr20det, I recommend it!
Great quality and quick delivery. Defiantly flows a lot more air than standard, temps lower and I can hear it pulling much more air. Great product
It definitely out flows the stock fan and performs better than some electric fan setups.
Fits good and works good
Im very happy with the product, service and postage 5 stars
Great fan, as soon as I installed it and started my car I instantly felt more airflow coming from the engine bay!!
Also easy to install
Excellent fan. Does what the box says and provides excellent airflow
Great product, quick install
I was introduced to this from a close friend of mine. This team did not disappoint! I love it.
Quick shipping
Needed something with better cooling, works well and temps are cooler, it is louder though.
Still in the building stage and yet to test it but good price great turn around time and what you see is what you get super simple would recommend for anyone 👌🏼
This fan 100% fixed my over-heating issue on my turbo rb30. Would and do recommend this product to anyone that's running on the hot side. 🔥
I paired this fan with a fresh fan clutch and I gotta say I was absolutely astounded. My temps were rock solid all weekend and never budged even after multiple sessions of hot laps. If you have an sr/ka/rv and you’re using the factory style fan, you need to buy this.
Buying parts from you guys is always a great experience. The guys in the warehouse are great to deal with and efficient and had my order ready for pick up within 1 business hour. Good job guys, always a pleasure.
Part was a perfect fit and works very well
Best upgrade I've done for my car. The product doesn't just perform better, but looks good too. I've had friends asking me to order one for their car.
The fans are very great for stock motors + modified not heavely considiring my country weather, overall great product.
I installed this fan using the VG adapter on a 2004 Frontier with the Supercharged VG33ER. Perfect fit.
AWESOME FAN! Like a tornado under my hood! Solved my overheating on hot days!
The car temperature reduced used it in summer with 45C temperature GTR33 RB26
Great kit, feels solid and well built. Looks great from what little you can see physically once installed. Noticeably reduced oil temps and better idle oil pressures with N1 pump and air cooled oil. **Koyo rad on RB26 BNR32 was extremely tight to change with rad installed but possible. You will have to drain a little coolant and take off the top hose as well as sliding the fan volute up with the fan as you remove it and reverse as you install but it is possible**
My own fan was found to be cracked and I saw a recommendation for GK Tech’s replacement. Order arrived quickly and installation was just like they demonstrate on a YouTube video.
Very good fast delivery good product
Highly recommend this fan....fits perfect 👍
Goes with your build
Picked just for you 😘
