The GKTECH engine bay brake line delete kits are designed to remove the hard brake lines within the engine bay. We developed these kits in order to clean up the engine bay. Our kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.
The FMVSS106 testing procedure that the lines have been tested against includes the following tests:
- 370lbs pull test
- 35 hour whip test
- 7000psi burst test
- -45degC to 146degC temperature tests
- 24 hour salt corrosion resistance test
- Assembled in Australia using quality fittings and stainless steel Teflon lined lines
- Direct replacement of the standard hard lines
- Cleans up the look of the engine bay
- No permanent modifications are required.
NOTE: If you have ABS and want a hard line delete kit, please refer to our ABS delete listing here: STAINLESS STEEL BRAIDED TEFLON LINED ABS DELETE KIT
NOTE: If you have an R33/R34 please refer to this listing here: R33/R34 ENGINE BAY BRAKE LINE DELETE KIT
GKTECH
S-Chassis/Skyline Engine Bay Brake Line Delete Kit
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.
The GKTECH engine bay brake line delete kits are designed to remove the hard brake lines within the engine bay. We developed these kits in order to clean up the engine bay. Our kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.
The FMVSS106 testing procedure that the lines have been tested against includes the following tests:
- 370lbs pull test
- 35 hour whip test
- 7000psi burst test
- -45degC to 146degC temperature tests
- 24 hour salt corrosion resistance test
- Assembled in Australia using quality fittings and stainless steel Teflon lined lines
- Direct replacement of the standard hard lines
- Cleans up the look of the engine bay
- No permanent modifications are required.
NOTE: If you have ABS and want a hard line delete kit, please refer to our ABS delete listing here: STAINLESS STEEL BRAIDED TEFLON LINED ABS DELETE KIT
NOTE: If you have an R33/R34 please refer to this listing here: R33/R34 ENGINE BAY BRAKE LINE DELETE KIT
Choose options
FAQs
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don’t know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it’s not listed on our website, then we don’t sell it. Sorry.
What modifications are required, are these hard to fit?
No modifications are required, simply just remove the factory hardlines and fit the braided lines as you feel necessary.
Is there anything else needed for installation?
You will need to re-bleed your brakes, so you will need tools and brake fluid. In terms of the lines they will arrive as shown in the product photo.
Can I install this myself? If so how long will installation take?
Yes, the brake lines are easy to install and should take around 30 minutes. Simply remove your OEM hardlines and replace them with your new lines, then tighten the lines referencing the OEM torque specs. You will then need to top up the brake fluid and bleed the brake system. Being the brake system we recommend only a trained professional to install this product.
VEHICLE COMPATIBILITY
Nissan
CEFIRO A31R32 SKYLINE GTS-T
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
Goes with your build
Picked just for you 😘
