Polyurethane S/R/Z Chassis Rear Knuckle Bushes (pair)

Bought these to replace the crusty oem rear knuckle bushes on my S15. These fit perfectly! They come pre split in half which made fitting super easy.

EZ install on new project
🦆

Used these on a Z32 300zx. Absolutely great fitting product.

Needed 30.5 mm bushes for rear tie rods. Happy to find they split them vs the install video. Fits snug. Rear end is tight again. Thanks GK

Worked great fast shipping to Hawaii. I appreciate you guys

Super good quality. Very easy install.

So much easier with them being split.. p.s you need 3 each side

Perfect fitment, easy install, very little effort pushing bushings into knuckle. 10/10 would recommend

Amazing quality

Purchased to install the hicas delete kit on my R33 GTST. Installation was a breeze, cleaned the knuckle with 600grit sandpaper, covered all contact surfaces with some moly grease and the brushes pushed right in with a g clamp.
After driving on these for well over 1000km now, I couldn't be happier. They have a real positive feel and haven't made a single squeek.

popped the inner piece in the freezer for a few minutes super easy to install took about 40 minutes

I had to purchase these again since the original ones that came with the v4 Toe arms were 1 piece and crumbled apart. These are better since they changed design to 2 piece.

My Driftworks bushes had dry rotted and practically fell out. These 2 piece GKTech bushes were so easy to fit I didn't have to take the knuckle off the car. Little grease on the bushes and I pushed them in by hand. Tapped the collar in with a hammer and refitted the arms. So easy to do. GKTech for the win everytime.

Coming from someone who’s really bad at pushing bushes in and out, it’s was pretty easy. I like the fact that they’re two piece, makes it so much easier.

I work with one of the leading importers here in the US, TopRank Importers.

We enjoy selling, driving, and racing 25+ legal JDM vehicles, and wouldn't be able to do so without the support of companies like GK Tech.

By providing quality parts that we both install on our inventory, and customer vehicles, allowing us to keep them on the road, and enjoy them for miles to come.

Thank you GK Tech, and we look forward to doing more business.

Best,
Steve Ellis
@GetBTW / @TopRankImporters

Great product with easy installation, definitely a must if your deleting hicas & planning to run adjustable toe arms

I cut mine in half and have no issues at all.

The parts fitted perfectly and have helped with the feel of the rear

Super easy install,solid product

Overall experience start to finish was easy, very high quality items and extremely satisfied with the end result. Would recommend in future.

This product is perfect

Blady Bewdy , easy to install

Just what I've been looking for, these can be hard to get elsewhere separate (usually it's the entire knuckle and then all the suspension arms that join onto the Subframe). Makes life a lot easier being able to buy in pairs.

Found these will also suit the factory traction arm on the Subframe end also. Thanks lads

Good experience. This set will fit z32 91 to delete hicas and replace old ball joint.

Easy to install and fast delivery!!